4 Channel BMS system for sale

Buy and sell
Post Reply
LRBen
Posts: 471
Joined: Thu Jul 04, 2019 6:35 pm
Location: Somerset, UK
Has thanked: 42 times
Been thanked: 99 times

4 Channel BMS system for sale

Post by LRBen »

Switching out my BMS system so have the 4 cell daisy chain BMS system left over. Would rather someone else make use of it than it gather dust on my shelf.
It consists of:
24 slave boards
1 master board complete with enclosure and connectors
1 master board missing stm32 and a power supply switch.
Cell taps for 84 cells.

It currently does run just fine. There is some jitter on the cell voltage readings so they fluctuate around 10mV up and down. Software is now all open source but I lack the skills to develop it any further. Would work just fine for stationary storage, which would be my intended use for it if I kept it. But I already have too many projects.

Cost me around £500 to get to this point. Looking for £300. Can ship to the UK for free. Rest of the world is probably possible. All proceeds will go back into playing with HV in cars.
Attachments
PXL_20220331_165158924.jpg
PXL_20220212_154724381.jpg
PXL_20220124_222052516.jpg
Post Reply