Chademo charging!

Nissan Leaf/e-NV200 drive stack topics
Post Reply
EvSteeve
Posts: 34
Joined: Tue Sep 07, 2021 10:01 am
Has thanked: 2 times
Been thanked: 1 time

Chademo charging!

Post by EvSteeve »

Hi guys!

I'm currently in the progress of installing a leaf setup, using the motor, inverter and pdm, we are using the ZombieVerter to control.

I'm hoping to use the chademo setup within the pdm, Has anyone made progress with implementing this with the ZombieVerter?

Thanks in advance!
User avatar
Bratitude
Posts: 783
Joined: Thu Jan 02, 2020 7:35 pm
Location: Canada
Has thanked: 57 times
Been thanked: 168 times
Contact:

Re: Chademo charging!

Post by Bratitude »

i dont think anyone has, but should be very straightforward to use the current hardware layout and just control the contactors directly with your own logic.
though I bet the necessary CANBUS ids are floating around in some of the available leaf logs. pretty much everything else has been decoded.
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
paaa
Posts: 209
Joined: Fri Dec 06, 2019 8:59 pm
Location: Dublin & Kilkenny Ireland
Has thanked: 2 times
Been thanked: 11 times
Contact:

Re: Chademo charging!

Post by paaa »

I have chademo logs somewhere along with a.c. charging logs , I'll dig them out.
User avatar
Jack Bauer
Posts: 3563
Joined: Wed Dec 12, 2018 5:24 pm
Location: Ireland
Has thanked: 1 time
Been thanked: 87 times
Contact:

Re: Chademo charging!

Post by Jack Bauer »

I'm going to need a hacksaw
Post Reply