chargecur parameter Topic is solved

Post Reply
chentron
Posts: 103
Joined: Mon Feb 22, 2021 3:25 pm
Location: Spain
Has thanked: 41 times
Been thanked: 4 times

chargecur parameter

Post by chentron »

Can someone please confirm that the parameter chargecur is the maximum current that will be used to charge the batteries?
so if I set chargecur = 20 .. the internal charger of openinverter v2 will only take from the grid a maximum 20 x 230= 4600 watts ?
(my setup chargemode= boost)
thanks
User avatar
johu
Site Admin
Posts: 5683
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: chargecur parameter

Post by johu »

Yes, in boost mode the current sensor measures input current
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Post Reply