2029 RPB GT2

Tell us about the project you do with the open inverter
Post Reply
torulf
Posts: 3
Joined: Sat Dec 14, 2019 4:43 pm
Has thanked: 1 time

2029 RPB GT2

Post by torulf »

I am about to start with my project car.
It is a car body from an old kit car, built in northern Sweden.
Builder is Racing Plast Burträsk. 1984-1986. https://racingplast.se/gt2.htm
The base used for these are the vw typ 1 or 3.
There is only one built to completion in this world.
4-5 bodies are built before they stopped, i now own the molds.
If i use the intended chassis i am not allowed to swap motor to anything other than original. Swedish laws...
So I am planning to build a space frame chassis for it.
I have a MB class B tesla battery, a Nissan leaf 80kw stack (as rear motor), Think City motor (as front motor), Brusa NLG5.
Planning to buy a prius inverter for the front motor.
Many things can change along the way as i change my mind faster than i build things.
I am very open to suggestions and opinions...
int.jpg
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Post Reply