Needed: Nissan Leaf BMS cell tap wires  [SOLD]

Buy and sell
Post Reply
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Needed: Nissan Leaf BMS cell tap wires

Post by johu »

For the Audi A2 project I will be using Nissan Leaf cells and the matching BMS. Does anyone have the tap wires left, possibly including the plastic pole covers? I have the second part of the loom, just the part with the lugs is missing. 24, 30 and 40 kWh wires are identical.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
ZooKeeper
Posts: 507
Joined: Mon Mar 30, 2020 10:23 pm
Location: USA

Re: Needed: Nissan Leaf BMS cell tap wires

Post by ZooKeeper »

Why yes I do have the tap wire harness, but the covers have been butchered for a couple other projects. Problem is shipping from USA to DE might take longer and cost more than they are worth.
Huebner VCU controlling a Gen2 Prius Inverter powering an MGR
"Talent is equally distributed but opportunity is not." - Leila Janah
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: Needed: Nissan Leaf BMS cell tap wires

Post by johu »

ok cool. Covers are not super important. Lets see what else comes up
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: Needed: Nissan Leaf BMS cell tap wires  [SOLD]

Post by johu »

Scrap that, I just cut off the "mezzanine" connectors and soldered the wires directly to the copper bus bars
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Post Reply