Tesla battery pack build

Post Reply
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Tesla battery pack build

Post by joromy »

Made 3D model of the aluminium frame for the battery modules.
It's made of standard aluminium square tube, 15x50mm and 15x25mm for side. And 20x80mm for end.
It's 11 modules in the back and 3 in front.

Step file:
Tesla_pack_assembly v2.zip
(1.63 MiB) Downloaded 165 times
Back_assembly v11.jpg
This is how it looks half way:
20170201_114718.jpg
Details of the HV connections:
20161007_192952.jpg
And almost finished:
20170405_154313.jpg
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Re: Tesla battery pack build

Post by joromy »



This is how it looks with the lid on.
And yes it will fit inside :)
IMG_20191010_103700_9.jpg
Here you can see, there is room for more batteries. (Original led acid pack)
20150423_155127.jpg
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
Post Reply