EMUS BMS in EV ranger with Joromy inverter board

Post Reply
User avatar
riii
Posts: 21
Joined: Tue Jul 30, 2019 2:18 am
Location: Oakland California USA

EMUS BMS in EV ranger with Joromy inverter board

Post by riii »

USA distributor of EMUS BMS systems is electronicmotorsport.com based out of Alameda CA

This is where you can order a kit: https://www.electricmotorsport.com/chec ... id/101512/

It should interface nicely with the new Joromy inverter board which I'm planning to do.
Cell communication CAN bus adapter may not be necessary.

Attached is a nice schematic of how the BMS should interface with an EV thankfully provided by Johannes.

Johannes, does there exist similar style schematics of the EV Ranger OEM? Particularly it would be nice to see how we can populate OEM connectors with new components like the BMS. The wiring PDF attached may be sufficient but it is cumbersome to flip through... or am I being lazy?

Thanks
-Bobby (riii)
Attachments
_2001 Ranger EV Wiring Diagram (1).pdf
(3.54 MiB) Downloaded 161 times
EMUS_BMS_typical_wiring.pdf
(167.55 KiB) Downloaded 158 times
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Re: EMUS BMS in EV ranger with Joromy inverter board

Post by joromy »

Have a look at this:
conn_inside_batbox.pdf
(798.49 KiB) Downloaded 167 times
This is all connections in the battery belly, with contactors and Simp BMS.
If you are going to use the original contactor box the precharge AUX and NEG contactor is done.

The rest should be same, except for the CAN bus on the Emus, don't think that would work for display.
The Emus has serial output for display, but you would probably use bluetooth and Emus app.

Will take a picture of my BMS box inside the battery belly.

Don't bother going through the Ranger manual!!!

Also d/l the Ranger_setup_new_3 - Schematic.pdf also for Simp BMS, but almost the same for Emus.
download/file.php?id=701
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Re: EMUS BMS in EV ranger with Joromy inverter board

Post by joromy »

riii wrote: Sun Sep 29, 2019 11:18 pm Attached is a nice schematic of how the BMS should interface with an EV thankfully provided by Johannes.
There is other Johannes's here :)
Please just use joromy, less confusing....
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Re: EMUS BMS in EV ranger with Joromy inverter board

Post by joromy »

Bobby

Have a look at this, connectors used is wago.
viewtopic.php?f=16&t=187&start=10#p2338

All connectors are labeled. (see Bat_pack_and_TIM_connectors_V1.1.pdf)

This is something similar, but with the Emus and "Keep BCM happy"
Emus_and_BCM_happy.jpg
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
User avatar
riii
Posts: 21
Joined: Tue Jul 30, 2019 2:18 am
Location: Oakland California USA

Re: EMUS BMS in EV ranger with Joromy inverter board

Post by riii »

All of these resources are coming in very handy. Thanks!!
User avatar
riii
Posts: 21
Joined: Tue Jul 30, 2019 2:18 am
Location: Oakland California USA

Re: EMUS BMS in EV ranger with Joromy inverter board

Post by riii »

Hi Joromy,

Where can I find the file Bat_pack_and_TIM_connectors_V1.1.pdf?

Thanks!
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Re: EMUS BMS in EV ranger with Joromy inverter board

Post by joromy »

It's in this post, because it also has pins for the Simp BMS.
viewtopic.php?f=16&t=187&start=10#p2338

Have a look in the Wiki:
https://openinverter.org/wiki/Main_Page ... M_inverter

Will try to gather all information there, now it's all over the place..... :?

Nice to hear from you again, I hope your Ranger project has progress.
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
Post Reply