Intech CCS controller

Development and discussion of fast charging systems eg Chademo , CCS etc
Post Reply
mikeselectricstuff
Posts: 120
Joined: Sun Nov 08, 2020 11:33 am
Been thanked: 2 times

Intech CCS controller

Post by mikeselectricstuff »

Apologies if this has been mentioned before - don't recall having seen it :
https://in-tech-smartcharging.com/produ ... -control-l
https://in-tech-smartcharging.com/produ ... e-module-s
User avatar
Jack Bauer
Posts: 3563
Joined: Wed Dec 12, 2018 5:24 pm
Location: Ireland
Has thanked: 1 time
Been thanked: 87 times
Contact:

Re: Intech CCS controller

Post by Jack Bauer »

No datasheet and no price. Gotta love the ev world...
I'm going to need a hacksaw
User avatar
muehlpower
Posts: 570
Joined: Fri Oct 11, 2019 10:51 am
Location: Germany Fürstenfeldbruck
Has thanked: 12 times
Been thanked: 96 times

Re: Intech CCS controller

Post by muehlpower »

Jack Bauer wrote: Sun May 16, 2021 9:54 am No datasheet and no price. Gotta love the ev world...
I contacted in-tech at the end of 2020. The modules S and L are perfect for our purposes, but if I remember correctly, they cost 300 € and 1400.-€
User avatar
johu
Site Admin
Posts: 5684
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: Intech CCS controller

Post by johu »

do you need both modules or just one of them?
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
muehlpower
Posts: 570
Joined: Fri Oct 11, 2019 10:51 am
Location: Germany Fürstenfeldbruck
Has thanked: 12 times
Been thanked: 96 times

Re: Intech CCS controller

Post by muehlpower »

johu wrote: Sun May 16, 2021 4:26 pm do you need both modules or just one of them?
one of the two
software stack.png
Modul S.png
User avatar
johu
Site Admin
Posts: 5684
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: Intech CCS controller

Post by johu »

So the 300€ S module would allow control of the CCS charger via CAN (or SPI)? Not bad if it's actually available.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
JaniK
Posts: 391
Joined: Sun Aug 25, 2019 12:39 pm
Location: Finland
Has thanked: 49 times
Been thanked: 10 times

Re: Intech CCS controller

Post by JaniK »

Interested indeed.
Any opinions are my own, unless stated otherwise. I take no responsibility if you follow my way of doing things and it doesn't work. Please double check with someone who knows what they are doing.
Post Reply