You'd have to re-compile the firmware. You can choose a different baud rate in terminal_prj.cpp at the bottom.
Are you using too long wires maybe? I've never seen (or heard of) that problem with a board seated module.
Send CAN message help
-
johu
- Site Admin
- Posts: 5769
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1014 times
- Contact:
Re: Send CAN message help
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9