CAD Models

Introduction and miscellaneous that we haven't created categories for, yet
Post Reply
User avatar
james@N52E01
Posts: 144
Joined: Wed Sep 18, 2019 7:02 am
Has thanked: 2 times
Been thanked: 3 times

CAD Models

Post by james@N52E01 »

I have started a section in the Openinverter Wiki labelled CAD Models to act as a general repository for any models people may wish to use to test fit components before deciding which system to use in their conversion. If you find a CAD model or create one yourself for any component please feel free to add it to the directory and make sure to credit the original author. If anyone would like a model that is not contained in the wiki, please add a request to the bottom of the page and if I or anyone else with a scanner has access to the component they can create a model, upload it to grabcad, post the link and delete the request.

https://openinverter.org/wiki/CAD_Models

It includes links for the Tesla CAD Models that were part of a previous thread, together with several other publicly hosted CAD models. I have also taken scans of the Mitsubishi Outlander battery module and the 450H Inverter.
tom91
Posts: 1272
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 97 times
Been thanked: 201 times

Re: CAD Models

Post by tom91 »

I just updated this with some more models I scanned.

IS300H inverter
RX400 MGR
VW Egolf coolant PTC
VW Egolf AC Comp
Founder Volt Influx https://www.voltinflux.com/
Post Reply