I am trying to understand the throttle parameters because the readings I am getting do not match my understanding. This is for a Leaf EM57 with Gen2 inverter and Rev3.0 Openinverter board. Beta Firmware 5.23R - Johu adjusted for idle feature (Reference Post). No regen set up at this time.
Relevant parameters:
Code: Select all
idcmax : 325;
potmin : 45;
potmax : 4095;
throtramp : 3.0;
throtramprpm : 5000;
throtcur : 5.25;
Does the throtcur parameter adjust the line - in this case shown in orange below for a 5.25 A/% setting? So shouldn't this mean we hit our 325A limit at approximately 62% throttle? Because this does not happen for me. I hit 250-ish idc at about 3300 digs. I have not been able to reach the idc limit. And this is confirmed by my Orion BMS.
If I change throtcur = 3.0, my max idc is only 188A. And I would expect throtcur = 1.0 to simply follow the potmin-potmax line.
What am I doing wrong?