broken link , please johannes Topic is solved

Post Reply
chentron
Posts: 103
Joined: Mon Feb 22, 2021 3:25 pm
Location: Spain
Has thanked: 41 times
Been thanked: 4 times

broken link , please johannes

Post by chentron »

hello
I have a purpose for this new year, to definitely start my evo conversion.
I has the mainboard v2 kit with LEM sensor from johannes and revisiting the web I find this broken link which would be nice to have again online.
https://openinverter.org/docs/index.htm ... ds,33.html
the broken link is the one that would redirect to sensor with LEM component.
thanks
User avatar
johu
Site Admin
Posts: 5685
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 154 times
Been thanked: 960 times
Contact:

Re: broken link , please johannes

Post by johu »

Must be browser dependent (some special characters in the link). It works here.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
MattsAwesomeStuff
Posts: 874
Joined: Fri Apr 26, 2019 5:40 pm
Has thanked: 280 times
Been thanked: 165 times

Re: broken link , please johannes

Post by MattsAwesomeStuff »

I dunno if this will help, but, in case it's the clicking of the link, not the going-to of the webpage that's tripping you up, here's a tinyurl of the same link above:

https://tinyurl.com/4n8afmf2
chentron
Posts: 103
Joined: Mon Feb 22, 2021 3:25 pm
Location: Spain
Has thanked: 41 times
Been thanked: 4 times

Re: broken link , please johannes

Post by chentron »

problem partially solved.
i was expecting the link to the LEM sensor, but aparently only there is a link to TAMURA sensor very similar.
I was confused with the word here " ...Go here for information about the legacy Tamura/LEM sensor boards. ..." normally word "here" is itself the link , but not in this case. The link is in the title :-)

So closing thread. thanks
Post Reply