EVSE controller PCB

Topics concerning OEM and open source BMSes
tom91
Posts: 1278
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 97 times
Been thanked: 204 times

Re: EVSE controller PCB

Post by tom91 »

Have updated the manual, please have a look and let me know if anything is still unclear.
Attachments
SimpCharge Manual V2.0.pdf
(326.49 KiB) Downloaded 254 times
Founder Volt Influx https://www.voltinflux.com/
User avatar
langoo
Posts: 65
Joined: Thu May 09, 2019 6:27 pm
Location: Varberg, Sweden

Re: EVSE controller PCB

Post by langoo »

How would you like to collect orders for this amazing gadget? 👍
Robin Hellström
MR Electronics AB
tom91
Posts: 1278
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 97 times
Been thanked: 204 times

Re: EVSE controller PCB

Post by tom91 »

langoo wrote: Wed Aug 12, 2020 8:45 pm How would you like to collect orders for this amazing gadget? 👍
you can email me at: the email address in the manual :)
Founder Volt Influx https://www.voltinflux.com/
IanG
Posts: 9
Joined: Thu Aug 15, 2019 6:39 am
Location: Essex, UK

Re: EVSE controller PCB

Post by IanG »

Hi Tom,
I have, hopefully, a quick question.

Can you please describe the spec of Pin 8 the “Conditioned Pilot Signal”.

I have an old AVC2, and use both an old granny cable at 10A and a standard Type2 at 32A 7kW, but have to manually change the charge rate. I’d like to use Pin 8 on SimpCharge to control the charge rate via my VCU, so it’s all automated.
Cheers,
Ian
tom91
Posts: 1278
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 97 times
Been thanked: 204 times

Re: EVSE controller PCB

Post by tom91 »

IanG wrote: Wed Jan 10, 2024 4:55 pm Can you please describe the spec of Pin 8 the “Conditioned Pilot Signal”.
It literally is a buffering of the CP signal, so you need to have an interrupt capable output to be able to determine the duty cycle.
Founder Volt Influx https://www.voltinflux.com/
Post Reply