Main relay opening when throttle signal  [SOLVED]

Topics concerning the Tesla front and rear drive unit drop-in board
Post Reply
User avatar
qmedia2651
Posts: 56
Joined: Tue Oct 06, 2020 4:13 am
Location: Orlando Florida, USA

Main relay opening when throttle signal

Post by qmedia2651 »

My main relay is cutting off when sending throttle signals.
341 dc at battery pack
Udc = 416v
Udcsw set to 80% of 341 =275v
BMW E46 pedal
Tesla SDU Logic board v5 open inverter organization board.
Every thing okay except cuts off my main relay.
Some times the motor makes a sound to spin
Any body had this problem before.
Please advise. Thanks
arber333
Posts: 3241
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 74 times
Been thanked: 223 times
Contact:

Re: Main relay opening when throttle signal

Post by arber333 »

qmedia2651 wrote: Fri Dec 31, 2021 8:13 pm My main relay is cutting off when sending throttle signals.
Is it possible voltage measurement would drop so low inverter would open contactor? Or raise reference above GND?
Try setting UDCSW voltage set to 60Vdc. Maybe that would cure the problem. Also try to record the graph of UDC measurement when applying throttle. You may find out your problem is voltage reference on the STM32 chip.
User avatar
johu
Site Admin
Posts: 5685
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 154 times
Been thanked: 960 times
Contact:

Re: Main relay opening when throttle signal

Post by johu »

Nope, undervoltage does not open the contactor.
It is most likely an overcurrent event or desat. What are your parameters? Please attach json file that you can download from the web interface.
Personally I'd raise udcsw to 320V or so.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
qmedia2651
Posts: 56
Joined: Tue Oct 06, 2020 4:13 am
Location: Orlando Florida, USA

Re: Main relay opening when throttle signal

Post by qmedia2651 »

Here is the Parameter file.
Attachments
params.json
(1.45 KiB) Downloaded 75 times
User avatar
qmedia2651
Posts: 56
Joined: Tue Oct 06, 2020 4:13 am
Location: Orlando Florida, USA

Re: Main relay opening when throttle signal

Post by qmedia2651 »

Johu here are some pics of the web parameters
with no voltage applied.
Attachments
Screenshot_20220101-095544_Chrome.jpg
Screenshot_20220101-095525_Chrome.jpg
Screenshot_20220101-095452_Chrome.jpg
Screenshot_20220101-095441_Chrome.jpg
Screenshot_20220101-095426_Chrome.jpg
User avatar
johu
Site Admin
Posts: 5685
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 154 times
Been thanked: 960 times
Contact:

Re: Main relay opening when throttle signal  [SOLVED]

Post by johu »

You have default parameters loaded, please use the "Download File" button here: https://openinverter.org/parameters/view.html?id=15 and then the "Upload parameters" on you web interface. Then save to flash. I'm guessing something in the configuration makes it trip.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
qmedia2651
Posts: 56
Joined: Tue Oct 06, 2020 4:13 am
Location: Orlando Florida, USA

Re: Main relay opening when throttle signal

Post by qmedia2651 »

OK Johu thanks a lot will do take care.
will try this out.
I am using V5.14R
User avatar
qmedia2651
Posts: 56
Joined: Tue Oct 06, 2020 4:13 am
Location: Orlando Florida, USA

Re: Main relay opening when throttle signal

Post by qmedia2651 »

Johu !! good news uploaded the parameters calibrated the throttle and WOW I hit the throttle to much the motor lifted from the front and knocked my level off.
Motor is working Thanks a lot goanna have to Patronize for the good help and learning.
Thanks very one.
User avatar
johu
Site Admin
Posts: 5685
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 154 times
Been thanked: 960 times
Contact:

Re: Main relay opening when throttle signal

Post by johu »

Great :)
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
qmedia2651
Posts: 56
Joined: Tue Oct 06, 2020 4:13 am
Location: Orlando Florida, USA

Re: Main relay opening when throttle signal

Post by qmedia2651 »

GOOD WAY TO START THE YEAR JOHU !!!!!!!!
Post Reply