Search found 371 matches
- Thu Jan 28, 2021 8:09 pm
- Forum: Classifieds
- Topic: Need middleman/help in UK [SOLD]
- Replies: 4
- Views: 1715
Re: Need middleman/help in UK [SOLD]
Thanks for the offer, but everything is sorted out. Just me being slow with the "sold" button. But will have it in mind, for next time. Don't really understand the shipping problem, had no problem with the package I got. Is it because of covid or brexit, that some companies will not ship a...
- Thu Jan 14, 2021 8:37 pm
- Forum: Open Tasks
- Topic: Design Me A T Shirt
- Replies: 40
- Views: 11953
Re: Design Me A T Shirt
EEVblog David L. Jones had a similar idea, and now it's copied and sold on aliexpress
https://www.aliexpress.com/item/4000229939566.html
https://www.aliexpress.com/item/4000229939566.html
- Thu Jan 14, 2021 9:39 am
- Forum: Classifieds
- Topic: Need middleman/help in UK [SOLD]
- Replies: 4
- Views: 1715
Need middleman/help in UK [SOLD]
Is there anyone in UK that can receive and send a small package to me?
The seller won't sell outside UK
Please PM me
The seller won't sell outside UK
Please PM me
- Tue Jan 12, 2021 7:07 pm
- Forum: Projects
- Topic: Porsche Boxster with Siemens and DMOC
- Replies: 139
- Views: 18418
Re: Porsche Boxster with Siemens and DMOC
Temperatures stayed very nice. Ambient was 15C which helped, but after 20 miles at 60-70 inverter only hit 36 and motor read 65 (that sensor is suspect, reading too high). What is temperature showing when it stay overnight? It should show same on inverter motor and ambient. I have used the Siemens ...
- Mon Jan 04, 2021 8:46 pm
- Forum: Tesla
- Topic: Tesla Charger alternative firmware
- Replies: 314
- Views: 49075
Re: Tesla Charger alternative firmware
Really happy, if the current jumping up and down issue has been fixed. Have installed 4 Tasla chargers, and it has been the same issue every time. It is worse at full power, not so much at low amps. Damien says: "Yes that's quite normal" https://openinverter.org/forum/viewtopic.php?f=10&am...
- Mon Jan 04, 2021 6:03 pm
- Forum: Tesla
- Topic: Tesla Charger alternative firmware
- Replies: 314
- Views: 49075
Re: Tesla Charger alternative firmware
Looks great!
Has the issue with Amp draw jumping up and down, been solved?
Then I want one.
Has the issue with Amp draw jumping up and down, been solved?
Then I want one.
- Fri Jan 01, 2021 10:19 pm
- Forum: Ford
- Topic: CAN bus instrument cluster + +
- Replies: 24
- Views: 11073
- Fri Jan 01, 2021 10:15 pm
- Forum: Ford
- Topic: CAN bus instrument cluster + +
- Replies: 24
- Views: 11073
Re: CAN bus instrument cluster + +
What do you mean when you refer to IAA board? Is that the larger board that your teensy add-on communicates with? Where is that from, the stock car? The IAA module is originally controlling the instrument cluster, and a lot of other tings like cabin heat radiator fan. I think it's called IAA module...
- Fri Jan 01, 2021 1:20 am
- Forum: General
- Topic: Controlling an analog dash
- Replies: 114
- Views: 14507
Re: Controlling an analog dash
I have done it with a teensy. CAN bus controlled from simp BMS and openinverter,
viewtopic.php?f=16&t=433#p4880
https://github.com/jomytec/Teensy-CAN-b ... ller-in-EV
viewtopic.php?f=16&t=433#p4880
https://github.com/jomytec/Teensy-CAN-b ... ller-in-EV
- Fri Dec 25, 2020 6:10 pm
- Forum: General
- Topic: Driver-IC for 16-20KHz PWM signal // suggestions ?
- Replies: 6
- Views: 1051
Re: Driver-IC for 16-20KHz PWM signal // suggestions ?
The DRV 103, is a good option.
Have not used it, but have used the DRV 102 with tesla contactors (had a lot of them laying around)
It just works!
viewtopic.php?f=13&t=131&p=4140&hilit=drv102#p4140
Have not used it, but have used the DRV 102 with tesla contactors (had a lot of them laying around)
It just works!
viewtopic.php?f=13&t=131&p=4140&hilit=drv102#p4140
- Wed Dec 23, 2020 9:49 pm
- Forum: Ford
- Topic: Ford Ranger Inverter board Support Thread
- Replies: 93
- Views: 30847
Re: Ford Ranger Inverter board Support Thread
Since I never found a reason to modify the TIM connectors it looks like we left the inverter in charge of the precharge relay. TIM Controls precharge.JPG Contactor Box.JPG That looks very sane, the precharge (pin 18) is only for the main contactors, controlled by the TIM. The precharge for AUX rela...
- Wed Dec 23, 2020 9:36 pm
- Forum: Ford
- Topic: Ford Ranger Inverter board Support Thread
- Replies: 93
- Views: 30847
Re: Ford Ranger Inverter board Support Thread
It's probably OK to use the old contactor box. It's just that I have spendt many MANY hours on testing/measuring and blown up stuff, to get my own setup to work. And I'm not so keen on start on a new configuration/setup. The contactor box electronics is measuring the voltage before it close the cont...
- Tue Dec 22, 2020 8:14 pm
- Forum: Ford
- Topic: Ford Ranger Inverter board Support Thread
- Replies: 93
- Views: 30847
Re: Ford Ranger Inverter board Support Thread
Nice to hear from you again. I have to think long and slow to remember this :) It's not that complicated, the picture is for the instrument mod and battery heater/cooler also! You need only two wires and a small signal diode. (The diode is obsolete, I can't see that it is needed anymore?) Wire from ...
- Mon Dec 07, 2020 10:39 pm
- Forum: General
- Topic: SMD soldering preferences?
- Replies: 1
- Views: 474
Re: SMD soldering preferences?
I have used both oven and hot plate. And I prefer hot plate and hot air, then you have full control of components sliding, and can correct it. And you can apply just enough heat and see the solder melt. If I make one board I use manual solder pasting, but stencil is not very expensive any more. How ...
- Wed Dec 02, 2020 7:05 am
- Forum: Jaguar
- Topic: IPace Front Motor Hacking
- Replies: 30
- Views: 11726
Re: IPace Front Motor Hacking
Cool name on the board to "Continental"?Jack Bauer wrote: ↑Tue Dec 01, 2020 3:45 pm edit : is it me or do FPGAs have the coolest names? Cyclone IV , Spartan 6 ....
- Wed Dec 02, 2020 7:00 am
- Forum: Jaguar
- Topic: IPace Front Motor Hacking
- Replies: 30
- Views: 11726
Re: IPace Front Motor Hacking
We should be glad they make big boards, and not tiny boards that is normal in almost any other product.
- Mon Nov 30, 2020 3:11 pm
- Forum: Getting Started
- Topic: water / flood sensor
- Replies: 9
- Views: 2048
Re: water / flood sensor
This is made for EV use, according to documentation. But it's only two pins and some resistors, not very complicated. It at least made by a reliable manufacturer and can withstand corrosive environment. Only $14.65 Amphenol Coolant/Fluid Leak Detection Sensor: https://www.digikey.com/en/products/det...
- Fri Nov 27, 2020 8:36 am
- Forum: Ford
- Topic: Ranger part compatibility
- Replies: 4
- Views: 4477
Re: Ranger part compatibility
Hey, cheers thanks! So they are male splines off the gearbox, not female. Or is one side male, the other female? haven’t yet, but looks like I got a deal for 2 motors for 1200$ cad. if I can figure out which cv axels work will make things quite easy Both output shafts on the gear/motor is male. out...
- Tue Nov 17, 2020 1:22 pm
- Forum: Ford
- Topic: Ranger part compatibility
- Replies: 4
- Views: 4477
Re: Ranger part compatibility
Alrighty ev ranger folks! there’s a guy locally selling 4 Siemens motors, transmissions and inverters. Any one have any info on the axle shafts that mate to this transmission? is it a stock ranger cv axle? Cheers Sorry missed this one, I have a picture from when I changed the shaft seal. Will try t...
- Sun Nov 08, 2020 9:10 am
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 631
- Views: 189224
Re: Simp BMS
Don't think that is necessary, the inputs are opto inputs and active high.
More important is to connect the right pin
Edit:
Sorry wrong again, you have the right pin!!!
More important is to connect the right pin
Edit:
Sorry wrong again, you have the right pin!!!
- Sun Nov 08, 2020 9:02 am
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 631
- Views: 189224
Re: Simp BMS
I think you have an old manual, d/l ver. 0.9 (or newer)
It should be pin 2 IN2.
Edit:
Sorry wrong again, you have the right pin!!!
There was swapped pins in old manual it's fixed i new manuals.
It should be pin 2 IN2.
Edit:
Sorry wrong again, you have the right pin!!!
There was swapped pins in old manual it's fixed i new manuals.
- Thu Nov 05, 2020 12:48 pm
- Forum: Inverters / Motor Controllers
- Topic: Boot loader version 4
- Replies: 17
- Views: 6655
Re: Boot loader version 4
Here is connections.
You can get some ready made adapters also
You can get some ready made adapters also
- Tue Oct 27, 2020 9:52 pm
- Forum: Tesla
- Topic: Tesla Motor Spinning
- Replies: 23
- Views: 3494
Re: Tesla Motor Spinning
Very interesting!!
More info pictures/video, please.
More info pictures/video, please.
- Sun Oct 11, 2020 7:21 am
- Forum: Tesla
- Topic: Tesla Charger Support Thread
- Replies: 785
- Views: 122998
Re: Tesla Charger Support Thread
I'm planning to use it with 14 Tesla modules and a small rear SDU. I've already bought an Orion BMS2 Why du you want to use a Orion BMS, when you have the BMS slaves from tesla already? You have several options for tesla modules, Simp BMS and EVTV, have used both of them. If you really want to use ...
- Tue Sep 29, 2020 7:53 am
- Forum: Ford
- Topic: Ford Ranger Inverter board Support Thread
- Replies: 93
- Views: 30847