Search found 471 matches

by LRBen
Tue Feb 13, 2024 12:00 am
Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
Topic: 11KW MLBevo charger group hack 5QE915684BJ possible
Replies: 36
Views: 1599

Re: 11KW MEB charger group hack

uhi22 wrote: Mon Feb 12, 2024 9:08 pm You could try to read the coding data with uds service hex 22 06 00
I think I managed to figure out sending that in ODIS, here is the response.
image.png
I can't get much from ODIS at all, it can connect and pull some data, but nothing like coding parameters etc.
by LRBen
Mon Feb 12, 2024 7:07 pm
Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
Topic: 11KW MLBevo charger group hack 5QE915684BJ possible
Replies: 36
Views: 1599

Re: 11KW MEB charger group hack

Last night I managed to get my PIWIS vm to behave, unfortunately it doesn't have support for the Taycan on it so I couldn't connect with that. Might have hit a little bit of a wall with that until I can find a more up to date PIWIS version. I will keep messing with both ODIS and PIWIS for now though...
by LRBen
Sun Feb 11, 2024 10:42 pm
Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
Topic: 11KW MLBevo charger group hack 5QE915684BJ possible
Replies: 36
Views: 1599

Re: 11KW MEB charger group hack

Ok have some sort of communication with ODIS. However it doesn't recognise it as a known variant. image.png image.png With this my Mongoose is sending the following can ids: image.png The charger then replies with the usual can ids as above. This is on the hybrid can. Charger doesn't go to sleep wit...
by LRBen
Sun Feb 11, 2024 5:52 pm
Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
Topic: MLBevo Charger- 11kw & 22kw Info
Replies: 24
Views: 5619

Re: MLBevo Charger- 11kw & 22kw Info

Started to investigate 684J 11kW charger. Used lcode but to code using vcds security code is needed so that was no go. Need to get some odis compatible adapter next, I think. If that's one of the batch from Lars I believe it's probably from a Taycan and probably won't response to ODIS. At least in ...
by LRBen
Sun Feb 11, 2024 4:40 pm
Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
Topic: 11KW MLBevo charger group hack 5QE915684BJ possible
Replies: 36
Views: 1599

Re: 11KW MEB charger group hack

Little bit further today on the hybrid can also with a socket setup as well. This time focusing on hybrid can. Charger wakes up when an EVSE is plugged in or taken out. With the application of the Charger workout script that Mitchy write on the hybrid can I get the same messages on hybrid can as was...
by LRBen
Sat Feb 10, 2024 7:54 pm
Forum: BMW
Topic: BMW S-Box Phev (SafeyBox 9846612)
Replies: 39
Views: 9636

Re: BMW S-Box Phev (SafeyBox 9846612)

anybody has been using the S-box in the car? Would you share your experiences how is it holding up? The contactors and the shunt? Anybody tested what Amperage it can measure? Had it in the MG since November, done over 1000 miles and it's still going fine. Pulls around 200 amps max and it's reported...
by LRBen
Wed Feb 07, 2024 11:57 pm
Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
Topic: 11KW MLBevo charger group hack 5QE915684BJ possible
Replies: 36
Views: 1599

11KW MLBevo charger group hack 5QE915684BJ possible

Thought I would make a new thread dedicated to the number of chargers sent out by Lars recently, then we can keep the main charger threads a little clearer. They are 11kw chargers, possibly "5QE915684BJ", these particular units seem to come from a StreetScooter stock. It is unknown if ther...
by LRBen
Tue Jan 30, 2024 8:31 pm
Forum: Projects
Topic: [First Drive] Leyland 255 Tractor - Nissan Leaf EM61
Replies: 39
Views: 9151

Re: [WIP] Leyland 255 Tractor - Nissan Leaf EM61

Have you checked the current being drawn by the Zafira PAS pump? I had one that sounded like that and it was drawing around 40A at idle and refused to spool down. The Volvo pump I just installed spooled down to draw only 7A when not turning the wheel and is lovely and quiet. Not yet, I'll put a cla...
by LRBen
Tue Jan 30, 2024 7:22 pm
Forum: Projects
Topic: [First Drive] Leyland 255 Tractor - Nissan Leaf EM61
Replies: 39
Views: 9151

Re: [WIP] Leyland 255 Tractor - Nissan Leaf EM61

Got the charger and socket physically installed and almost wired up. Potentially might be able to have a first attempt at charging this weekend. PXL_20240120_154012130.jpg Also tried the power steering for the first time. Still not connected to the wheels but the ram does move pretty well so I think...
by LRBen
Mon Jan 22, 2024 5:40 pm
Forum: Projects
Topic: [Driving] MG F - Outlander Rear motor and inverter.
Replies: 169
Views: 42892

Re: [Driving] MG F - Outlander Rear motor and inverter.

Learnt a lesson in water proofing today. Driving to work I noticed a slight cut out of power as I pulled onto the first fast road of my commute. Thought it was a maybe some issues with the throttle. A few more miles and it got allot worse, I checked throttle values in the web interface and it all se...
by LRBen
Fri Jan 19, 2024 8:59 pm
Forum: Projects
Topic: [Driving] Freelander EV With Gen1 Leaf electrics and EVBMW VCU
Replies: 259
Views: 253311

Re: [Driving] Freelander EV With Gen1 Leaf electrics and EVBMW VCU

Alibro wrote: Fri Jan 19, 2024 8:42 pm Now I need to look at the drivers window regulator that is making some horrible noises and the rear NS that isn't dropping at all. :rolleyes:
Still kept some classic Freelander features I see!

Glad to see you sorted out the bugs.
by LRBen
Sun Jan 07, 2024 11:16 pm
Forum: Getting Started
Topic: General component purchasing tips?
Replies: 2
Views: 540

Re: General component purchasing tips?

Or, like secondhand purchases in general, not much; it's just the nature of the beast?  Make sure I have the right model/part number(s), cross my fingers and trust the breaker/seller? For most components it's basically that. Fortunately for the most part EV components tend to be pretty reliable. I ...
by LRBen
Sun Jan 07, 2024 9:07 pm
Forum: Projects
Topic: Jaguar XJ6 V12 will be electric!!!
Replies: 32
Views: 4202

Re: Jaguar XJ6 V12 will be electric!!!

The inverter has arrived, now waiting for the Zombiverter and getting ready to start tinkering. I need to find the batteries; I was thinking about 40-50kWh, but it raises a question. I know the Gs450h can operate from 288V; initially, I was planning to go with 400V to make all components more compa...
by LRBen
Sun Jan 07, 2024 8:48 pm
Forum: Projects
Topic: [First Drive] Leyland 255 Tractor - Nissan Leaf EM61
Replies: 39
Views: 9151

Re: [WIP] Leyland 255 Tractor - Nissan Leaf EM61

Made a good start on the 12v wiring over the holidays. The main fuseboxes and relays are in, dashboard is in, some lights works. Made a short video to give an overview of the whole project so far. https://youtu.be/bQJz-InnQR8?si=nJJd0yG3hP-O5b3j The power steering is almost there as well. I just nee...
by LRBen
Sun Dec 10, 2023 3:04 pm
Forum: Mitsubishi
Topic: Mitsubishi Outlander rear motor invertor
Replies: 31
Views: 13084

Re: Mitsubishi Outlander rear motor invertor

Inverter shuts down over around 405v.
by LRBen
Sat Dec 02, 2023 4:43 pm
Forum: General
Topic: outlander charger with zombieverter
Replies: 13
Views: 2661

Re: outlander charger with zombieverter

In the current firmware release the Outlander charger is only working with the i3lim interface, but will be fixed in the near future to run without it.

I can send you my stm.bin file if you can't compile from the pull request.
by LRBen
Tue Nov 21, 2023 7:04 pm
Forum: Projects
Topic: [Driving] MG F - Outlander Rear motor and inverter.
Replies: 169
Views: 42892

Re: [Driving] MG F - Outlander Rear motor and inverter.

Useful data, thanks. Comes a little way short of what i was hoping for given the "paper" specs. The factory figures for a 1.6 MGF are ~9 seconds to 60. The outlander motor on paper at least has more torque at 195nm vs 145nm for the 1.6L engine. Peak current of 225A at say 350v suggests a ...
by LRBen
Mon Nov 20, 2023 9:21 pm
Forum: Projects
Topic: [Driving] MG F - Outlander Rear motor and inverter.
Replies: 169
Views: 42892

Re: [Driving] MG F - Outlander Rear motor and inverter.

I'm intrigued with the performance that this motor can provide, do you have any performance data? 0-60 time? What sort of battery power does it pull when at full send? Just had a couple of goes. But I think the phone gps is a bit laggy, got pretty much bang on 11 seconds according to Torque pro. In...
by LRBen
Sat Nov 18, 2023 12:07 pm
Forum: Projects
Topic: [Driving] MG F - Outlander Rear motor and inverter.
Replies: 169
Views: 42892

Re: [Driving] MG F - Outlander Rear motor and inverter.

MOT passed, back on the road again! I'll try and get some video of it driving soon.
by LRBen
Sun Nov 12, 2023 10:00 am
Forum: News
Topic: Electric cars catch fire in Florida after flooding
Replies: 15
Views: 10491

Re: Electric cars catch fire in Florida after flooding

Facts aren't all that useful for the remaining people that are ardently against EVs. Every one of them seems to have recently talked to a fireman who says most of his call outs are to EV fires. Then the response to anything stating facts or fires that were started by an ICE car like the Luton airpor...
by LRBen
Thu Nov 09, 2023 1:09 pm
Forum: Vehicle Control (VCU)
Topic: Zombie Firmware for ZE1 e+
Replies: 1
Views: 6270

Re: Zombie Firmware for ZE1 e+

That gen1 module will run any gen leaf as far as I am aware. I have personally seen it running up to 2019 leaf inverters and motors no problem.

I think the issue you have is voltage, pretty sure the lead needs a few more volts to run via canbus.
by LRBen
Thu Nov 09, 2023 1:07 pm
Forum: General
Topic: Insuring your DIY EV in the UK
Replies: 17
Views: 6192

Re: Insuring your DIY EV in the UK

Got outright refused by the NFU for the MG, because of the age of the vehicle and the modifications. Strangely they were quite happy to quote for the 50 year old tractor with the same modifications. Ended up going with Adrian Flux at £636, annoyingly £40 more than the renewal quote back in June. I d...
by LRBen
Tue Nov 07, 2023 8:03 pm
Forum: Vehicle Control (VCU)
Topic: Zombie and SDO
Replies: 8
Views: 8046

Re: Zombie and SDO

Got it working today. First I needed to add the SDO id to the canbus filter in stm32_vcu.cpp canInterface[1]->RegisterUserMessage(0x601); //CanSDO canInterface[0]->RegisterUserMessage(0x601); //CanSDO It uses the new format of SDO semantics. Take the parameter id you want to change from param_prj.h....
by LRBen
Mon Nov 06, 2023 8:12 pm
Forum: Projects
Topic: [Driving] MG F - Outlander Rear motor and inverter.
Replies: 169
Views: 42892

Re: [Driving/WIP] MG F - Outlander Rear motor and inverter.

Upgrades are pretty much done now. BMW hybrid battery sitting nicely in the front subframe, freeing up space in the cabin for a passenger seat yet again. Zombieverter is in running everything, had to make a few additions to the charger module to run stand alone but it's working great now. I'll submi...