bottom cradle is mostly done. Links from the body mount near the driver side lower controller arm bushing, to the beam spanning across the front. Then the gearbox bushing bolts to the cradle. Does the crade mount to the existing mounting points? No new holes need to be drilled? Do you have more pho...

Hi,

Anybody interested in Nissan Leaf gen3 aircon units with hoses and HV leads?

Battery packs available: Polestar 2 78 kwh, PSA 50 kwh, Kia EV6 77 kwh, Mini (BMW) 32kwh, MB EQA 68 kwh, Kia/Hyundai 64 kwh, Leaf 40 & 62 kwh (always available), BMW X5 24 kwh, BMW 12 kwh, Porche Taycan, Tesla Model S & Model 3/Y, Mustang mach e, Nissan eNv200, VW ID.4 etc. Can ship to most ...

Variuos EV drivetrain motors/inverters for sale. Nissan Leaf 110 & 160 kw full stacks but can split also, Lexus GS/IS/RX series, Tesla M3, Model S and some others. Also chargers, heaters, aircon compressors etc. Shipping to most of EU and UK. Please get in touch and let me know what you need.

Hi,

Have 216 pcs of VL41M cells for sale. They are still very close to original capacity.
PM or whatsapp me: +447596977030

Another X5 24 kwh pack for sale. Complete. Can ship to most of EU, UK, Ireland and Northern Ireland etc. PM for details

Hi, anybody interested in a complete Tesla model S 85 kwh battery pack only 34k on the clock. Very good condition. Can ship to most of EU and UK. Please get in touch.

So as the LFP packs are starting to be used in OEM EVs more widely wonder what chances do we have to use those in projects and conversions? Mainly it is difficult to determine how much charge they have left. What would be our options for BMS and SOC estimation? Would hacking the OEM BMS be a necessi...

Is motor loaded? Unloaded motor will keep spinning since there is no regen yet.

Hi there, Ioniq 5 and Kia EV6 battery packs for sale, several packs available. I think they are ~78 kwh each. 5000€ per pack or NO, delivery to most of EU, IRL & NI and UK. Can split and ship only half of the pack for less. They are essentialy 2x 400v packs in one enclosure. Two halves could pos...

Same one as in the photo by Tomas and also 6.6 kw version available for sale from MG

For sale Tesla gen3 12 kw 2 phase oboard charger. 2x 6 kw charging modules inside. PM for details

@m.art.y how much does that X5 battery weigh? Google isn't giving me an answer. I'm going to guess around 200kg. I have 11 modules out of 12 and one module is 12 kg. 11 modules still give you 88S and ~316v nominal at 132 kg without the casing. 12 kwh BMW pack would be even lighter but the capacity ...

Scrappyjoe wrote: ↑Wed Mar 20, 2024 9:57 am Voltage range 300v-400v.

Not counting housing.

I think if I can get 15kwh I'll be happy.

Thanks for the link, I'll check it out!

Can offer BMW X5 24 kwh (22 kwh)

Hi, Jus wondering if somebody would be interested in cell swapped Nissan Leaf battery packs? These are meant to upgrade gen1 and gen2 Nissan Leafs with 24 and 30 kwh packs. Original Leaf 40 kwh packs are still expensive due to demand to upgrade older Leafs. So using 24 kwh battery casing and differe...

Hi, for sale BMW X5 24 kwh battery. Almost full pack with one module missing. Can be used as is - still respectable capacity of 22 kwh for a small car or one module can be sourced to make it full pack again. A few bits from the casing are missing too. Can ship to most of EU and UK. Please PM with yo...

boekel wrote: ↑Fri Mar 01, 2024 2:42 pm so:
4 big blocks with each 2 modules of 12s 18.7kWh
3 small modules 4s each, 3.11 kWh

So how many cells in series total that is? And in parallel?

Nissan Leaf 110-160 kw stacks for sale. Complete or split. I do include extras and also support if needed together with a purchase of the motor stack. PM for details

Tell me if I'm wrong but I figure that a 104S will give me a little bit more capacity without an unusable increase in voltage for the Leaf Gen3 stack. Up to 108S would be perfect for a Nissan Leaf gen3 stack. Even the PDM can easily charge up to ~435v. But 3x96 would still have more cells so more c...

Hi, up for sale is a Polestar 2 (volvo) 78 kw battery. Inside are 27 modules in 4s3p configuration. There is a connector on each module that gives access to each cell for BMS. PM if interested.

johnlr wrote: ↑Fri Dec 01, 2023 12:49 pm I have a 69kWh Polestar battery

Hi, would you share what's the configuration? Is it known which cells are used? Thanks

Hi, anybody has been using the S-box in the car? Would you share your experiences how is it holding up? The contactors and the shunt? Anybody tested what Amperage it can measure?

Bratitude wrote: ↑Fri Feb 09, 2024 4:03 pm HV interlock wires off the pdm tied together?

Which are the HV interlock wires off the PDM?

EdvartsW4E wrote: ↑Thu Feb 08, 2024 12:54 pm CALB cells, while the e208 use CATL

Alright, if you find the correct datasheet please share.

yasko wrote: ↑Thu Feb 08, 2024 11:37 am I'm a little skeptical about used hardware (ESP32), but maybe it's time to give it a chance

Thanks, what other hardware could be used for that? Perhaps something more arduino friendly like Due or Teensy?