hello, what todays price?
8128205050

sure! i can confirm the gen2 a/c compressor is just a 3 wire connection from the bottom half of the inverter. I will look for and document signals. if anyone has a specific area of interest, it will speed up the process so I dont have to start from scratch with the schematics. and I have a new sigle...

I believe when I stepped on the throttle it instantly calculated I was stuck on a hill and because there was no feedback from the wheel speed sensors just ramped up the current. that is consistent with the rapid runaway that sometimes happened on the video. I wonder how we can test for the boost con...

https://www.youtube.com/watch?v=ZNaQwEPomvs

mostly raw footage of a stock prius connected to a rav4 rear end with a surprise

for testing, I parked a running gen2 prius close enough to run wires for the motor and resolver into the MGR. after reversing resolver sin and cos I was able to get forward and reverse control. but only until the oem prius operating system spun up what it thought was mg2. excessive speed and the onl...

anybody have parameters working for a toyota rav 4 rear end? its called an MGR. I have been away from the project for a year or more and when I uploaded the newest firmware I no longer have wheel movement in foc. using stock prius battery for testing at 200v. also anybody using an onboard generator?...

and this is my own version, with wires shown from 2013

ive mounted a 2016 rav4 hybrid rear end into this 1942 truck frame.

its been more than a year since I was here.. anybody besides zookeeper had any luck with this? He seems to have stalled like me.

see my post about an EV chris craft
also you may email me

look up steve woodruff on facebook

here is a short video of my electric boat underway.

an update of the Electric chris craft I used the OEM system and hid all the wiring behind the helm in the bow. I had to place the park motor in the system and I had to spoof the air conditioning airbox by shorting the plug on the battery pack. LEAFSPY worked for seeing trouble codes https://youtu.be...

gold coupler in this photo allows for a small amount of prop misalignment, but its an 8th of and inch from the floor

Hi Colm, I have been working on a rear oil seal leak on the blue ( antique ) transmission. also a random motor overspeed event bent my prop shaft. now I have a shaft coupler and i have installed cedar runners to support the LEAF pack on the boat stringers. I am still undecided how to get the pack ch...

hugo, when I had that problem... it was a cold solder connection at the MCU. is your board one that needed the microprocessor rotated before johu shipped it to you?

...Oh, just saw your message and photo...yes, you have a bad 2003, I got mine from amazon

im looking for confirmation the new firmware works before i get back to work..what is a polo acim test johu? and does it affect the FOC firmware?

its simple and complicated. with a staff of 9 and licensing, insurance , mortgages , I need to earn 1300 a day before making any money. so you see, time becomes part of the equation on parts sales. the next most expensive is shipping. the part itself is sometimes the least valuable item on the invoi...

"Full disclosure... I own autobeyours.com"

Autobeyours.com is Americas largest prius recycler.

still lurking

thanks, Im still lurking over there on that thread. spent the day today reading johus 34page vw project. it makes me lean toward going full stock nissan hardware and software... imagine no battery bms or charging hacking and climate control too (already built in to the nissan.) so much so that I rem...

I have a question about configuring software , I am using the gen3 openinverter board inside the leaf gen 2 inverter... and all is inside a boat. my problem as shown in this very short video is the throttle goes very fast after a few seconds without changing the position of the throttle pot. https:/...

I can send pix and confirm colors etc,and can have my staff try software, but im not at the Indiana office for the next week. im at the Florida office working on the LEAF powered boat.
will be lurking as well.

sorry, i dont know.

at 1 minute 15 seconds you can see the toyota colors and what works.
also notice red yellow swap may be needed for you. mine did.

if you have a gen2 prius transmission, the original equipment is a resolver, not an encoder. so choose resolver.
i will link a tub vid with colors you may see in a minute