Knew it would fit, on the original gearbox support and front plate with a small piece of floor cut out on each side and reorganised oil pump pickups , now where’s the welder….

Thank you - that would be useful before i go to the expense of replacing it. I'm in Bicester but can post it to you. Another set of eyes on it would be helpful in case i am being a muppet somewhere. Can you PM me an address and I'll find some sensible packaging. I'll probably dpd it given the post ...

I am attempting to order a replacement board from JLCPCB using the gerber file etc as supplied. There is an inventory shortage on a few items, most of which can be sorted but there is a component labelled PS1 (SGM3204), which is a negative voltage charge pump which is out of stock. If i can get thi...

Yes the isa shunt is required and I have explained that in the video series and put links in the video description to : https://www.evcreate.nl/shop/charging/ivt-current-sensor/ Over on the wiki page the videos are even indexed with the specifics of connecting the shunt and the why : https://openin...

Stupid question , does using the IS300 with a zombieverter still need the Isabellahute current shunt ? if so does anyone know of a source of these, I've looked all over and in the video it seems to be on the bench (17.30) but not mentioned where the hookups are described

Yes; I thought I would VPN into the car but indeed "phone home" is even safer concept. I just would like to schedule heating and monitor charging / settings. And know where the vehicle is. Boating people have SignalK/Influx db and dashboard with grafana like this .. https://www.youtube.co...

I purchased a mainboard kit from the shop, it arrived, and was working fine. Today, I made some small edits to the firmware and uploaded the binary, and now the 'alive' LED isn't flashing. I powercycled the board, and tried to upload the original firmware, but this kept failing (the green LED on th...

Hi @nic ,

I've got a c zero motor in a 2cv project , will any imiev/ion/czero inverter work with it and the zombieverter ?

cheers
John

@ bjp
I have a couple of new dual motor boards auris need building but would seriously consider v1c single board with the jumpers soldered powering both as a simpler option

where did everything go? did you finish the trike? Trike is still in the build , I have a couple of other builds on the go too , and been reengaging with the world post covid, designed, built and installed off grid solar on the workshop and house and married off youngest daughter! Basically life sl...

Update ! @Pete9008 , full erase , partial success, I couldn't leave it alone and started again , can now see the inverter management console by wifi but it's not all there, will not load even the freshest stm32_foc.bin , the 'waiting' icons just keep going round and round and the led2 on the board i...

Oh, hmm, I've not programmed a board from Windows, just Mac or Linux. I'm not familiar with Cube, so can't help with the specifics of that. But it stands to reason that if the error started after reprogramming, then something went wrong with the reprogramming. I'd suggest trying to reprogram the bo...

Hi Christian , yes , originally the parameters were showing , led was flashing and so i gave it 12v on pin3 (FWD), set encmode to AB , fslipspnt and ampom testing params each to 1 and got the message 'inverter started' but I found no PWMs , (this may be me not good with my new hantek) , I diverted m...

Hello again knowledgeable people, been away for a while taking the shed and house off-grid with solar and my Ampera batteries, can anyone give me a clue about retrieving the following pickle ? I recently got (another) Yaris board ( the smoke got out of the old one) and built it up carefully, voltage...

Yes , I love 2cvs and have owned 15+ of them!, I bought this van with a seized engine and decided it was the perfect runaround at my shed which I have just taken off-grid . this whole setup with 15kwh of batteries should make a nice little machine and charge from the sun in summer. It will have abou...

Noob question from someone who should know better ....if a guy got a V1c board working in open loop and all was progressing well then got complacent and hooked 12v to a car battery the wrong way round, blowing the 5A fuse , with a little bit of smoke , what might he have to replace to see life in it...

So , Happy new year everyone ! Having declared getting this 2cv to run this year as a new years resolution I have spent a little time nudging the project forward . The Smart pack has now been torn down and yielded about 40 useable cells , giving me about 160 v but as the miev moptor will work way ab...

Hi people , in order to improve in the workshop I now have an ancient Ipad to talk to the wifi , I have loaded an old laptop with ubuntu and bought myself the minimum solution to the oscilloscope problem for hunting sine waves, a Hantek 1008c which works well on their windows software on my main lap...

Good stuff on eltek here :
https://www.thebackshed.com/forum/ViewT ... &TID=12035 see p 2 for driving multiples

Here’s what I found poking around with a voltmeter with the unit switched on . Perhaps some of you CAN savvy people can tell what’s going on and how to control a number of these chained together

Been reverse engineering these things, this works but is crude , I’ll post my voltage findings when I’ve written them up . I’ve got 4 in series now giving 200+v dc . What could possibly go wrong!!

Good news : secured a Smart Fortwo battery from someone else’s project , Bad news :there’s only 6v in the whole thing but may be able to revive most cells

This guy is using a complete i-Miev drivetrain for his BMW 318i: https://318iev.blogspot.com/ I don't know if there is a lot of useful information for you because he uses the complete drivetrain, but maybe you can find something you can use. Check the bar on the right side for all his posts. @ Mark...

Hi guys , I'm adapting a miev motor to run in a 2cv van https://openinverter.org/forum/viewtopic.php?f=11&t=1467&p=31854&hilit=2cv#p31854 , does anyone have any information about this Meiden motor , specifically the pole pairs and respole pairs ? Here is a pic of what appears to be a 4 l...

Anyone got any LM2776DVBR SOT23-6 -5v pumps spare ? The smoke came out of mine and they all seem to be in a container somewhere off china due 2022 ! . Happy to pay silly money for a couple to get going again on the controloler for this build https://www.openinverter.org/forum/viewtopic.php?f=11&...