This the axle flange that was left over from my mecedes drive shafts.

I made this for myself!

Gregski wrote: ↑Sun Apr 07, 2024 5:38 pm why the hell does that say U=

The symbol for voltage is U - derived from the Latin urgere (to urge, drive, push). The SI unit is the volt, named after Alessandro Volta.

the meaning of the 2 bits (16+17) is:
00 Not plugged in
01 Plugged in
10 Error
11 Signal invalid
the meaning of the next 2 bits (18+19) is:
00 Button not pressed
01 Button pressed
11 Signal invalid
only for type 1

did you see that? https://www.ebay.de/itm/285744978081?itmmeta=01HS6PF8CN3P3BT0WEEQ0HC39P&hash=item4287ba58a1:g:7eYAAOSw5vVl5JrP&itmprp=enc%3AAQAJAAAAwJ4g6spmZN7ZVkxfBoA4v%2FEaeYAcMe5v06yDVk4jy021kWJisozpC%2FYiifrN4N95R448dHMezUhV07FieFWiS5AQhMTAM1nET3Fww11FQwcNcWRf%2FGMhi0AjvfSDGo7oMjL%2FzX...

You should receive the necessary information from the LIM for the maximum current from 3B4h. With 3E9h you have to transmit the charging status to the LIM so that it controls the LEDs and locking etc. correctly. And a signal, e.g. byte[7] = 0x2A to 51Ah to prevent the LIM from going to sleep. It may...

Crimpen was always a German word and was only adopted by the Americans

Cool, bei mir ums Eck. Of course I'll come by and get to know the famous UHI.

One more try, then I'll test whether it works with 400V!!!!!!!!!

After further attempts it now looks like this:

this happens when I press F5.

the internet connection seems to be working. When I click on OpenInverter Forum in support I end up in the forum.

in most things I see the mask, in WIFI SETTINGS everything is just white!

now it's a little different. At the bottom left corner it says firmware : null /web : v2.1 and I can't select a node id.

yes, the interface is visible, but no parameters and with the error message like in the picture.

Yahha777 wrote: ↑Sat Feb 24, 2024 6:20 pm This is the ESP32 file system. Do this after flashing the ESP.

Then, as you described, I first clicked “Build filesystem image” and then “Upload filesystem image” again 100% and success. But it hasn't changed!

what I have done: I downloaded the ZIP file from GitHub and unpacked it into a folder. I have VSC and the platformio extension installed. In platformio.ini I changed the 3 lines and entered the correct IP address. Then I opened a new terminal window and changed to the unpacked directory and entered ...

what are spifs?

I tried to install the latest software, but now it doesn't work anymore. The connection works, but I get the following message. CAN.png I downloaded the ZIP file from here and changed the 3 lines in the .ini. https://github.com/jsphuebner/esp32-web-interface/tree/can-backend platformio ran through a...

Or the list must be deleted, as described here.

viewtopic.php?p=64754#p64754

I think using 12V is a good idea. According to the Design_Guide_Combined_Charging_System, the CP line always has 12V / 1k at the beginning.

I assumed there will be a momentary-contact switch near the charge inlet, to do user-input things such as: That's pretty much what I've described here. I also prefer to keep the 330Ohm at 5V because of compatibility. The only thing that bothers me is that someone else can stop my charging. This cou...

How do I get the latest version as a hex file? I can't get the toolchain to compile it myself to work. ( too stupid)

Can't you just take a MAC address from an old PC network card lying around? That would be genuine and unique.

1. Idle/wake/ unlocked - White or Blue Constant 2. Plugged in and waiting + locked - Green Constant 3. Charging started + locked - Green Pulsing 4. Stopped and unlocked - White or Blue Constant 5. Error - Red Constant I like this color scheme, with white light after waking up. In my case, the LEDs ...