Thank you, firmware should be different between Mitsubishi Outlander and Peugeot Ion because yesterday I was able to drive the inverter with only the frame ID 0x285, without specific sequence

EV_Builder wrote: ↑Sat Jul 30, 2022 6:25 pm The last three steps how often can you repeat that?

I tried 2 times

Sorry I made a mistake my original message was here : https://openinverter.org/forum/viewtopi ... 305#p43305

Ok now I am able to drive the inverter/motor : - I start the car with all CAN IDs from car to inverter filtered but 0x285 - When high voltage is present on inverter, I emulate 0x288 frame from inverter to car with my computer to prevent the car to detect error and stop high-voltage on inverter, and ...

Hello ! Actually I built the electrical power train of 3 electric buggys, using Peugeot Ion Meiden motor, which is the same motor than Outlander PHEV I believe. To drive these Meiden motors I actually use Rinehart inverters from Cascadia Motion. It works but Rinehart inverters are very expensive, an...