Turns out that it was a grounding issue or something. I disassembled, checked everything, fixed nothing, and then reassembled. Now it works again. I'm using a large board on the kind of inverter where I had to drill extra holes. I think I need to improve the ground conection on the now-unused screwh...

Yes. Those were all low or no voltage. Voltages were fine prior to short circuit. I am not sure where a long line the issue is. I'll double check those points again and try to trace it backward to see where stops being correct. I've been thinking it may be the buck converter. I'm going to check for ...

It worked! But I'm continuing to have a power issue.ill try and go update the wiki soon with some more tidbits. The 680 marked inductor gets hot. Sometimes get the whine. Sometimes not. Never get any lights (well, actually once since this started). I was connecting to the IDC dupont connectors. Pin ...

Hey all, I replaced C49 with a 10uf capacitor (as per wiki) on the dual board. How do I tell if my board needed that? Should I go back to a 0.1uf? Is it all the v1d boards? The wifi on MG2 doesn't flash firmware or read parameters. MG1 works fine. Also, I only have a blinking light on MG1... The at...

Hey all, I replaced C49 with a 10uf capacitor (as per wiki) on the dual board. How do I tell if my board needed that? Should I go back to a 0.1uf? Is it all the v1d boards? The wifi on MG2 doesn't flash firmware or read parameters. MG1 works fine. Also, I only have a blinking light on MG1... The att...

The Remy looks like it makes a bit more torque at 400V for a little bit longer. Well here it is its twin brother from BMW X6 without alu casing and oil pan because X6 transmission takes care of oil cooling and lubrication. https://www.youtube.com/watch?v=GnqJ2HPH1hA I can vouch it works with Johann...

Thank you! My inveter has no hardware and I was dreading trying a bunch!

Random question: Does anyone know the size / threads foe the bolts that hook the 3 mg1 / mg2 cables to the inverter?

After searching around I have found the torque specs but not a size

Thanks,
wcc