I tried using a gen3 Prius inverter on an em61 motor to replace a 50hp diesel engine rated at 2700 rpm and 75ft lbs driving a hydraulic pump. im getting 245 ac motor amps as measured by my ut208B clamp meter and 1300 rpm. The 84s battery was at 345 volts and 40 amps. Im looking for the best inverter...

I have throtcur at 4.5, my params are here https://openinverter.org/parameters/view.html?id=30 and once moving I've had phase currents of 450 amps with logs I've taken previously. I do have MG1 and MG2 paralleled though what's the battery amps? Did you check anything with a clamp meter? I'm finding...

Gen 3 prius inverter and em61 motor connected to a hydraulic pump. replacing a 50hp 2700 rpm diesel engine. im only getting 245 apms on the phase wires and rpm drops to 1300. here's a video and pics https://www.icloud.com/sharedalbum/#B0o5nhQSTHmuiNo 42s lips battery At 1300rpm motor voltage is 67 a...

How much did you pay?

I just ordered one of these for $50. I know theres not a working board yet. How can I test to make sure it’s a working inverter? Says could not be tested, sold as is. https://www.ebay.com/itm/276212473629?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_wCk25fmRmS&sssrc=4429486&ss...

Corvallis Oregon

I’m trying to find the oem uvw wires. I know we can make up whatever we want. I’m looking through the oem service manual and can’t locate a diagram.

Update: got confused because idc ribbon cable and ampseal pinout are same half the time, well with resolver its all mixed up. Must be on the ampseal pinout. Also could not find this online anywhere, the open inverter excitation frequency is 4.4khz and the voltage is 3.2 volts AC no load (without any...

I think I burned out my resolver excite. Getting nothing on amp seal pin 21 and 22

Is this normal em61 resolver ohms?

Need HELP ASAP!! Trading these adapter plates for help tuning gen3 with em61 motor. Made from Polymaker ASA, high temp and outdoor rated, 40% infill and 4 walls, went through 9 revisions to get it just right as its a very close fit. Comes with stainless screws. text 417-256-1989 or search Eli Protiv...

I have a gen 3 prius inverter and leaf em61 motor that replaces a 50 hp engine. Do I need the resolver? I’m going for simplicity and reliability.

pm sent

Hey u make any progress? Looking at using 4 of these for a 40ft solar rock crawling rv