Search found 50 matches

by Renegate2020
Sun Jan 28, 2024 10:56 pm
Forum: Mitsubishi
Topic: Mitsubishi outlander charger and DC:DC
Replies: 352
Views: 94558

Re: Mitsubishi outlander charger and DC:DC

Good day. Tell me, can I use the W005T70172 converter according to this scheme?
by Renegate2020
Mon Jul 17, 2023 4:14 pm
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

I had exactly the same. First I broke the wheel drive, the second time the inverter burned down. Every time it was a problem of uncontrolled regeneration Something similar happened to me - after a sharp start, the wheel drive broke. I restored it. only now, after lightly pressing the accelerator, t...
by Renegate2020
Sun Jul 16, 2023 1:21 pm
Forum: User Interface
Topic: How to find out the error
Replies: 4
Views: 3417

Re: How to find out the error

Interested in the meaning of error 12164?
Maybe there is a section with decoding of error numbers?
by Renegate2020
Wed Oct 05, 2022 5:12 pm
Forum: User Interface
Topic: How to find out the error
Replies: 4
Views: 3417

Re: How to find out the error

thank you
by Renegate2020
Wed Sep 14, 2022 8:02 am
Forum: Nissan
Topic: Nissan Leaf Gen1 DCDC control
Replies: 23
Views: 11502

Re: Nissan Leaf Gen1 DCDC control

Has anyone used it without connecting it to the car's cooling system?
by Renegate2020
Tue Sep 13, 2022 4:39 pm
Forum: User Interface
Topic: How to find out the error
Replies: 4
Views: 3417

How to find out the error

Today, at the start, my bus refused to go. I looked at the web page - there is an error [8943] DESAT - STOP.
I want to understand what this error is and where there is a wiki on possible errors.
by Renegate2020
Sat Sep 10, 2022 7:07 pm
Forum: User Interface
Topic: Update via wifi fails
Replies: 26
Views: 9595

Re: Update via wifi fails

how to delete files through android device?
by Renegate2020
Wed Aug 24, 2022 12:43 pm
Forum: Nissan
Topic: Unable to close precharge and main contactor
Replies: 8
Views: 971

Re: Unable to close precharge and main contactor

check uln2003 on the main board
by Renegate2020
Sat Jul 02, 2022 1:27 pm
Forum: Charging
Topic: Chademo Controller Development
Replies: 511
Views: 89491

Re: Chademo Controller Development

Where can you buy a kit?
The link in the first post is not working :(
by Renegate2020
Fri Jul 01, 2022 12:13 am
Forum: Vehicle Control (VCU)
Topic: ZombieVerter VCU Support
Replies: 915
Views: 326576

Re: ZombieVerter VCU Support

I have a strange question - is it possible to use this board to control the charging of a chademo nissan leaf pdm without connecting an inverter and a motor?
by Renegate2020
Fri Jul 01, 2022 12:08 am
Forum: General
Topic: Precharge and Contactor Control [SOLVED]
Replies: 28
Views: 8203

Re: Precharge and Contactor Control [SOLVED]

From November 2021
by Renegate2020
Mon Jun 27, 2022 9:41 pm
Forum: Vehicle Control (VCU)
Topic: ZombieVerter VCU Support
Replies: 915
Views: 326576

Re: ZombieVerter VCU Support

what is the maximum power you can get from Nissan Leaf gen2 invertor when using ZombieVerter VCU?
by Renegate2020
Thu Jun 23, 2022 7:18 pm
Forum: General
Topic: Precharge and Contactor Control [SOLVED]
Replies: 28
Views: 8203

Re: Precharge and Contactor Control [SOLVED]

I had a similar problem. I went the easy way - I bought a relay with a delay timer on Ali Express and installed it on the control output of the main contactor. Set a delay of 1 second. Now, when an impulse arrives, the relay simply does not turn on due to a delay.
by Renegate2020
Wed Jun 08, 2022 8:00 pm
Forum: Inverters / Motor Controllers
Topic: Inverter Firmware v5.14.R
Replies: 23
Views: 5864

Re: Inverter Firmware v5.14.R

I'm assuming it's a V3 + adapter board Nissan Leaf. It was similar for me - when turned on, an impulse passes to the main contactor. Because of this, the main contactor is welded. I set a timer to turn on the main contactor.
by Renegate2020
Sun May 29, 2022 10:27 am
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

Absolutely agree. I want to understand why this happened so that it does not happen again in the future.
by Renegate2020
Sun May 29, 2022 8:38 am
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

I disassembled the inverter a bit and such a nuisance. Could the reason be in uncontrolled regeneration?
by Renegate2020
Sat May 28, 2022 8:29 pm
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

Thank you. Can you tell me what should be the signal from the inverter and on which connector to check?
by Renegate2020
Sat May 28, 2022 5:19 pm
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

With R2 soldered and wires connected 5.8v and there is an overvoltage error, with wires disconnected we have 0v and the overvoltage error disappears.
by Renegate2020
Sat May 28, 2022 3:20 pm
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

V3+ Nissan Leaf adapter board
by Renegate2020
Sat May 28, 2022 12:24 pm
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

On pin 4 of the JP7 connector, I have + 5v. The high voltage battery is disabled. So there should be no tension there? Which side to look for the problem?
When disconnecting all wires from the inverter to the adapter board, the voltage on pin 4 changes to 3.4v. The error remains.
by Renegate2020
Fri May 27, 2022 3:31 pm
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

Thanks Johu. Demolition will take place tomorrow.
by Renegate2020
Fri May 27, 2022 11:07 am
Forum: Nissan
Topic: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]
Replies: 22
Views: 10383

Re: Leaf Gen2 and EM57 Bench Test Problem [SOLVED]

Hello.
You didn't have contact at JP7?
I have a similar problem - an overvoltage error (667v) appeared while driving. When the high-voltage battery is disconnected, the error does not disappear.
by Renegate2020
Sat Mar 12, 2022 10:21 am
Forum: Nissan
Topic: Nissan Leaf Gen1 DCDC control
Replies: 23
Views: 11502

Re: Nissan Leaf Gen1 DCDC control

After disassembling the block, it seems to me that the use of pin 11 is not necessary. only pin 3 (+12v) and pin 1 (pwm) can be used. Pin 11 connects to the high voltage relay, not to the dc/dc box
by Renegate2020
Sat Mar 12, 2022 9:53 am
Forum: Projects
Topic: Solar Powered Ute
Replies: 28
Views: 5759

Re: Solar Powered Ute

what wires (color) does dc/dc use?